We use cookies to understand how you use our site, give you an awesome experience, and deliver our services. By using our site, you acknowledge that you have read and agree to our Privacy Policy and Terms of Use
USA: 1-800-4GIBSON
Europe: 00+8004GIBSON1
Browse the 2015 Model Year
Choose a Finish to Display
Facebook
Share on Tumblr
Reddit
Email To
Buy
ES-335 Left Handed
$3,199
No other guitar has contributed to more different styles of music than the ES-335, from Jazz to Rock to Blues to Country, the ES-335 has been involved with the evolution of music itself. The image of the ES-335, its curves, its lines, are as unmistakable as any other in music iconography. With this Limited Run of 50 ES-335s made especially for the Left-Handed players of the world, Gibson Memphis provide the finest in American craftsmanship, Maple top, back & rims, Mahogany neck with "Slim Taper" profile, Rolled neck binding on a Mahogany neck with a cream bound Rosewood board with bone nut, Burstbucker 1 & 2 pickups, Nickel hardware, Milk Bottle Rotomatic tuners, and an F-Hole engraved truss rod cover. All available now to the Left-Handed artists in our market.
Body
Top
Back
Top
Wood Species: Maple, Poplar, Maple
Pieces: 3-Ply
Grade: Plain
Binding: Cream
 
Back
Wood Species: Maple, Poplar, Maple
Pieces: 3-Ply
Density: Plain
Binding: Cream
 
Rims
Species Wood: Maple, Poplar, Maple
Pieces: 3-Ply
Grade: Plain
Weight
Weight Relief:
Average Weight (body only): 2.1069 kg / 4.645 lbs
 
Materials Used
Glue: Franklin Titebond 50, Maple centerblock, Spruce braces, Mahogany rim liner
 
Tonal, Resonant, and/or Technical Effect: The sound waves resonate within the hollow airspace of the Maple veneered Body, around the F-holes, and throughout the solid glue joints.
 
Body Contour
Carve: Left Handed ES (Semi-Hollow)
Neck
Neck
Wood Species: Mahogany
Pieces: 1
 
Details
Truss Rod: Historic
Profile: Slim Taper
Thickness at Fret 1: 20.32 mm / .800"
Thickness at Fret 12: 22.225 mm / .875"
Other Materials: Franklin Titebond 50
Average Weight: 394.6254 g / 0.870 lbs
 
Peg Head
Type: SP-1
Inlay: Mother of Pearl Crown
Peg Head Binding: None
Silkscreen: None
Headstock Angle: 17 degrees
Tonal, Resonant, and/or Technical Effect: The wood, construction, and headstock pitch all contribute greatly to the tone, aiding this guitar's exceptional sustain and depth, and yielding a resonance that can be felt right through the body.
 
Neck Fit
Joint Angle: 4 degrees
Joint Angle Tolerance: 0 deg 0 min 15 sec
Type: Mortise and Tenon
Adhesive: Franklin Titebond 50
Gauges Used: Pitch Height Gauge, Alignment Gauge
Nut
Style: White
Material: Bone
Width: 4.2545 cm / 1.675"
Slots: E: 1.2268 mm / 0.0483"
A: 0.9601 mm / 0.0378"
D: 0.6934 mm / 0.0273"
G: 0.4534 mm / 0.01785"
B: 0.3467 mm / 0.01365"

e: 0.2667 mm / 0.0105"
 
Fingerboard
Wood Species: Rosewood
Pieces: 1
Shade: Medium
 
Fingerboard Details
Radius: 30.48 cm / 12 "
Frets: 22
Nut/End of Board: 4.2545 cm / 1.675" @ nut, 5.6718 cm / 2.233" @ end of board
Scale: 62.865 cm / 24.75"
Binding: Cream
Side Dots (Color): Black
 
Fingerboard Inlays
Style: Block
Material: Pearloid
Dimensions: Large: 19.558 mm x 12.70 mm / 0.770" x 0.500"
Small: 25.40 mm x 6.35 mm / 1.00" x 0.250"
Average Weight: 136.0777 g / 4.800 oz
Finishes
Cherry
Color Code: CH
Surface Texture: Smooth/ Hi Gloss 90 Sheen Lacquer
Filler: Natural
Sealer: 1-1.5 mils
Top: Cherry
Top Coat: Hi Gloss Lacquer/ 90 Sheen 7-8 mils
Scraped: Fingerboard Sides, Body and Nut
Electronics
Pickups Rhythm Lead
Style: Burstbucker 1 Burstbucker 2
Winds/Coil: Screw side/Slug side: 5000/5200 5300/5500
Material of Wire (gauge): Enamel (42) Enamel (42)
Coil Dimensions (per coil): 6.6294 cm x 1.7272 cm / 2.61" x 0.68 " 6.6294 cm x 1.7272 cm / 2.61" x 0.68"
Coil Material: ABS ABS
Coil Winding Process: Machine Wound Machine Wound
Pole Piece Material: Nickel Nickel
Pole Piece Position from Nut: 47.3075 cm / 18.625" 59.52998 cm / 23.437"
Slug Material: Nickel Nickel
Slug Dimensions (diameter x length): 4.7495 mm x 1.24206 cm / 0.187" x 0.489" 4.7495 mm x 1.24206 cm / 0.187" x 0.489"
Magnet Material: Alnico II Alnico II
Magnet Position from Nut: 48.26 cm / 19" 58.7375cm / 23.125 "
Magnet Dimensions: 6.35 cm x 1.27 mm / 2.5" x 0.5" 6.35 cm x 1.27 mm / 2.5" x 0.5"
Polarities: Screw side is the south pole of magnet Screw side is the south pole of magnet
Cover: Nickel plated Nickel plated
Qfactor: 5.4 5.35
ResistanceDC: 7.64k ohms 7.98k ohms
Resonant Frequency: 2863 Hz 2780 Hz
Tonal & Resonant Advancements:
Control Pocket Assembly Volume
Type: CTS 500K Linear
Peak Voltage: 1080V
Range: 0-500K
Power Rating: 1/4 watt above 100K ohms
Resistance Tolerance: 500K +/- 10%
Minimum Resistance: 100 ohms
 
  Tone
Type: CTS 500K Audio
Peak Voltage: 1080V
Range: 0-500K
Power Rating: 1/4 watt above 100K ohms
Resistance Tolerance: 500K +/- 10%
Minimum Resistance: 100 ohms
 
Capacitors: Lead Value Rhythm Value
  .022mf .015mf
Hardware
Tuning Keys
Style: Milk Bottle Grover Rotomatic
Material: Die cast alloy
Weight: 38.5554 g / 1.36oz
 
Tuning Keys Details
Tuning Ratio: 18:01
Gear Type: Synchronized spur gear system
What is allowable turn: +/- 4 degrees
Plating specs: Nickel
Part numbers: 430-14192 / 430-14193
 
String Dimensions
E: 1.1684mm / 0.046"
A: 0.9144 mm / 0.036"
D: 0.6604 mm / 0.026"
G: 0.4318mm / 0.017"
B: 0.3302mm / 0.013"
e: 0.2540mm / 0.010"
 
Bridge
Style: Tone Pro AVR-2
Material: Die cast alloy
Plating Specs: Nickel
Part number: 430-10155TP
Weight: 61.235 g / 2.16 oz
 
Dimensions of String Slots
E: 1.2268 mm / 0.0483 inches
A: 0.9601 mm / 0.0378 inches
D: 0.6934 mm / 0.0273 inches
G: 0.4534 mm / 0.01785 inches
B: 0.3467 mm / 0.01365 inches
e: 0.2667 mm / 0.0105 inches
 
Tailpiece
Style: Locking Stop Bar
Compensated: No
Material: Die cast zinc
Plating Specs: Nickel
Part number: 430-10173 / 430-10568
Weight: 113.3981 g / 4.0 oz
 
Output Jack
Style: 1/4" jack
 
Jack Plate
Style: N/A
Material: N/A
Part Number: N/A
Weight: N/A
 
Strap Buttons
Material: Aluminum
Plating Specs: None
Part numbers: 430-19150
Weight: 2.268 g / 0.080 oz
Plastics
Pick Guard
Style: Multi ply black ES-335 (Left Handed)
Part Number: 430-12063
 
Truss Rod Cover
Style: Black and white bell with engraved F-Hole
Part Number: 430-19802
 
Knobs
Style: Black Top Hat
Part Number: 430-19669
 
Dial Pointers
Yes/No: Yes
Control Plate(s) (Backplate Cover)
Style: N/A
Part Number: N/A
 
Control Plate(s) (SwitchPlate Cover)
Style: N/A
Part Number: N/A
 
Switch Washer
Style: N/A
Part Number: N/A
 
Trim Rings
Style: Black
Part Number: 440-13850
Accessories
Case
Style: Hard Shell
Color: Tan
 
Strap Locks: No
Tools: None
 
Manual: None
COA/Other: Gibson Memphis COA